Stud resources https://stud.myassembly.co/resources Articles and product updates from Stud, the AI agent for prefab builders. en Construction take-off from 2D plans with AI: what works today https://stud.myassembly.co/resources/construction-take-off-from-2d-plans-with-ai https://stud.myassembly.co/resources/construction-take-off-from-2d-plans-with-ai Fri, 23 Oct 2026 08:00:00 GMT article An AI agent can read a DXF, a PDF or a plan image and give you wall, floor and roof quantities. What works today, and where it still needs you. DXF vs PDF vs image: what to give a take-off tool https://stud.myassembly.co/resources/dxf-vs-pdf-vs-image-what-to-give-a-take-off-tool https://stud.myassembly.co/resources/dxf-vs-pdf-vs-image-what-to-give-a-take-off-tool Fri, 23 Oct 2026 08:00:00 GMT article DXF, PDF, plan image or hand sketch: what each format carries, what a take-off tool reads from it, and how to send it so nothing is guessed. What an AI agent for construction actually does (and what it doesn't) https://stud.myassembly.co/resources/what-an-ai-agent-for-construction-actually-does https://stud.myassembly.co/resources/what-an-ai-agent-for-construction-actually-does Fri, 23 Oct 2026 08:00:00 GMT article Not a chatbot, not a drawing tool: an agent reads your plan, builds the model, asks what is missing and does the steps. What that means, and its limits. Settings: your instructions, your skills, your roll-former https://stud.myassembly.co/resources/settings-instructions-skills-roll-former-tools https://stud.myassembly.co/resources/settings-instructions-skills-roll-former-tools Tue, 20 Oct 2026 08:00:00 GMT update Tell Stud once how you work. Instructions apply to every project, skills hold your methods, and your roll-former's tools decide what it places. Two plans: Take-off for quantities, Framer for production https://stud.myassembly.co/resources/take-off-and-framer-plans https://stud.myassembly.co/resources/take-off-and-framer-plans Thu, 15 Oct 2026 08:00:00 GMT update Take-off turns a 2D plan into the quantities you price with, exported to Excel, CSV and PDF. Framer adds panels, framing and every production export. Production exports are live: machine files, IFC and production PDFs https://stud.myassembly.co/resources/production-exports-are-live https://stud.myassembly.co/resources/production-exports-are-live Tue, 06 Oct 2026 08:00:00 GMT update The framed model now leaves Stud as machine files for Howick and Tekla Pinnacle roll-formers, IFC for the team, and PDFs for the shop floor.